whole, which is the thruster compact in structure based on the high-quality hydraulic components and highly reliable
control system. In addition, this thruster can output thrust. It is widely used as the drive device of industrial disc and drum
brake, and also can be applied in the drive control of various industrial valves, gates and clamping devices.
When the ambient temperature is lower than -30°C or higher than +60°C, special instructions are required when ordering.
The thruster can operate according to the S1 or S3 working system; the working cycle period is not limited; the motor operates according to the S3 working system, the working cycle period is not limited, and the continuous running time of the motor is less than 5s.
Big starting thrust, small operating noise.All components are installed inside, redundancy design.
Quick response time, automatically pressure compensating, adjustable returning speed.Integrated control box, fault display and LED acting data display.
Adopt electric control module and hydraulic control module integration Design, compact in structure, light weight.
High protective class. Protective class of the whole machine reach IP66, C4 anti-corrosive design. Good anti-corrosive property.
Adopt intermittent operating mode, low oil-leaked hydraulic components. After pressure reached the setting value, motor will stop operating, and then enter into the pressure-holding mode.
Displacement sensor: It can monitor any position where the thruster is ejected.
Electrical motor winding heating zone: for use in humid coastal areas.
HED Series Thrusters：
Max. thrust (N)：1700、2700、5000、6000、12000
After sales service：400-103-0095